Title

Document Type

Year

Ts. Nor Fauzi Bin Tamin, Profesor Madya Ir. Dr. Mohd Hadzley Bin Abu Bakar, Profesor Madya Ts. Dr. Umar Al‐Amani Bin Haji Azlan, Muhammad Faiz Bin Mokhtar, Muhamad Naim Fahmi Bin Abdul Manap, Aziz A.A.

Comparison Machining Performance Of Al2O3, Zta And Zta Doped Cr2O3 Cutting Tools On Aisi 1045, Source Title: Materials Research Express, Volume: 6, Issue No.1, Article ID/No:16547, ISSN:20531591

 

 

Article

 

 

2019

 

Dr. Rohana Binti Abdullah, Profesor Madya Dr Md Nizam Bin Abd Rahman, Profesor Madya Dr Mohd Rizal Bin Salleh

A Systematic Approach To Model Human System In Cellular Manufacturing, Source Title: JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING, Volume: 13, Issue No.1, Article ID/No:, ISSN:1881‐3054

 

 

Article

 

 

2019

 

Kathiravan S/O Subramaniam, Profesor Madya Dr Sivakumar A/L Dhar Malingam, Ng Lin Feng, Ts. Dr. Omar Bin Bapokutty

The Effects Of Stacking Configuration On The Response Of Tensile And Quasi‐Static Penetration To Woven Kenaf/Glass Hybrid Composite Metal Laminate, Source Title: Polymer Composites, Volume: 40, Issue No.2, Article ID/No:, ISSN:2728397

 

 

Article

 

 

2019

Ts. Syahrul Azwan Bin Sundi @ Suandi, Profesor Madya Dr Raja Izamshah Bin Raja Abdullah, Profesor Madya Dr Mohd Shahir Bin Kasim, Abdul Thaqif Bin Mohd Amin, Thanis A/L Kumaran

Influence Of Router Tool Geometry On Surface Finish In Edge Trimming Of Multi‐Directional Cfrp Material, Source Title: IOP Conference Series: Materials Science and Engineering, Volume: 469, Issue No.1, Article ID/No:12026, ISSN:17578981

 

 

Conference Paper

 

 

2019

 

Ts. Syahrul Azwan Bin Sundi @ Suandi, Profesor Madya Dr Raja Izamshah Bin Raja Abdullah, Profesor Madya Dr Mohd Shahir Bin Kasim, Abdullah M.K.A. Effect Of Machining Parameters On Surface Quality During Edge Trimming Of Multi‐Directional Cfrp Material: Taguchi Method, Source Title: IOP Conference Series: Materials Science and Engineering, Volume: 469, Issue No.1, Article ID/No:12095, ISSN:17578981

 

 

Conference Paper

 

 

2019

 

Ir. Ts. Mohamad Hafiz Bin Harun, Samin P.M., Hudha K., Bakar S.A.A., Adzni Bin Md. Saad

Modelling And Verification Of Tractor Ride Model, Source Title: IOP Conference Series: Materials Science and Engineering, Volume: 469, Issue No.1, Article ID/No:12077, ISSN:17578981

 

 

Conference Paper

 

 

2019

 

Win Adiyansyah Indra, Ts. Mohd Saad Bin Hamid, Ts. Norfadzlia Binti Mohd Yusof, Nishanthinidevi A/P Jayraman, Ts. Herdy Rusnandi*

Frequency Reuse Optimization For Ofdma Network, Source Title: Journal of Engineering and Applied Sciences, Volume: 14, Issue No.4, Article ID/No:, ISSN:1816949X

 

 

Article

 

 

2019

 

Ts. Hanizam Bin Hashim, Profesor Madya Ts. Dr. Mohd Shukor Bin Salleh, Omar M.Z., Sulong A.B.

Effects Of Mechanical Stirring And Short Heat Treatment On Thixoformed Of Carbon Nanotube Aluminium Alloy Composite, Source Title: Journal of Alloys and Compounds, Volume: 788, Issue No., Article ID/No:, ISSN:9258388

 

 

Article

 

 

2019


 

 

Title                                                                                                                                                                                                                                       Document Type                                                                                                                                                                                                                       Year

 

Iskandar Bin Waini, Ishak A., Pop I.

Unsteady Flow And Heat Transfer Past A Stretching/Shrinking Sheet In A Hybrid Nanofluid, Source Title: International Journal of Heat and Mass Transfer, Volume: 136, Issue No., Article ID/No:, ISSN:179310

 

 

Article

 

 

2019

 

Mohd Fauzi M.A., Saud S.N., Hamzah E., Dr. Mohd Fauzi Bin Mamat, Ming L.J.

In Vitro Microstructure, Mechanical Properties And Corrosion Behaviour Of Low, Medium And High Carbon Steel Under Different Heat Treatments, Source Title: Journal of Bio‐ and Tribo‐Corrosion, Volume: 5, Issue No.2, Article ID/No:37, ISSN:21984220

 

 

Article

 

 

2019

Muhammad Zulfattah Bin Zakaria, Zulkifli N.W.M., Masjuki H.H., Harith M.H., Syahir A.Z., Norain Binti Idris, Dr. Ridhwan Bin Jumaidin, Yusoff M.N.A.M., Alwi A., Jamshaid M., Arslan A.

Effect Of Bio‐Based Lubricant Towards Emissions And Engine Breakdown Due To Spark Plug Fouling In A Two‐Stroke Engine, Source Title: Journal of Cleaner Production, Volume: 221, Issue No., Article ID/No:, ISSN:9596526

 

 

Article

 

 

2019

Ts. Dr. Norfariza Binti Ab Wahab, Siti Haidar Atiah Binti Mohd Azmi, Ts. Abd Khahar Bin Nordin, Dayanasari Binti Abdul Hadi, Ts. Siti Halma Binti Johari, Dr. Suhaila Binti Mohd Najib

Development And Analyzation Of Linear Positioning Table For Drilling Machine, Source Title: ARPN Journal of Engineering and Applied Sciences, Volume: 14, Issue No.3, Article ID/No:, ISSN:18196608

 

 

Article

 

 

2019

 

Mohd Fairuz Bin Jaafar, Profesor Madya Ts. Dr. Mohd Shukor Bin Salleh, Profesor Madya Dr Raja Izamshah Bin Raja Abdullah, Hassan M.H., Ts. Syahrul Azwan Bin Sundi @ Suandi, Mohammad Shah All‐Hafiz Bin Mohd Shahrim, Profesor Madya Dr Mohd Shahir Bin Kasim

Influence On Thrust Force And Delamination For One Shot Drilling Of Carbon Fibre Reinforced Plastic (Cfrp), Source Title: International Journal of Mechanical and Mechatronics Engineering, Volume: 19, Issue No.1, Article ID/No:, ISSN:22272771

 

 

Article

 

 

2019

 

Ir. Mazlan Bin Ahmad Mansor, Ahmad Z., Abdullah M.R.

Experimental Investigation On Low Velocity Impact Of A Novel Fibre Metal Laminate (Fml) Tube, Source Title: International Journal of Mechanical and Mechatronics Engineering, Volume: 19, Issue No.1, Article ID/No:, ISSN:22272771

 

 

Article

 

 

2019

Ts. Mohd Zaidi Bin Mohd Tumari, Amar Faiz Bin Zainal Abidin, Mohamed Saiful Firdaus Bin Hussin, Ts. Ahmad Muzaffar Bin Abdul Kadir, Profesor Madya Dr Mohd Shahrieel Bin Mohd Aras, Ahmad M.A.

Pso Fine‐Tuned Model‐Free Pid Controller With Derivative Filter For Depth Control Of Hovering Autonomous Underwater Vehicle, Source Title: Lecture Notes in Electrical Engineering, Volume: 538, Issue No., Article ID/No:, ISSN:18761100

 

 

Conference Paper

 

 

2019

 

Khairum Bin Hamzah, Nik Long N.M.A., , Senu N., , Eshkuvatov Z.K.

Stress Intensity Factor For Multiple Cracks In Bonded Dissimilar Materials Using Hypersingular Integral Equations, Source Title: Applied Mathematical Modelling, Volume: 73, Issue No., Article ID/No:, ISSN:0307904X

 

 

Article

 

 

2019


 

 

Title                                                                                                                                                                                                                                       Document Type                                                                                                                                                                                                                       Year

Profesor Madya Dr Mohd Shahir Bin Kasim, Mohammad Shah All‐Hafiz Bin Mohd Shahrim, Ghani J.A., , Haron C.H.C., Profesor Madya Dr Raja Izamshah Bin Raja Abdullah, Ts. Syahrul Azwan Bin Sundi @ Suandi, Mohamed S.B., Dr. Intan Sharhida Binti Othman

Investigation Of Surface Topology In Ball Nose End Milling Process Of Inconel 718, Source Title: Wear, Volume: 426‐427, Issue No., Article ID/No:, ISSN:431648

 

 

Article

 

 

2019

 

Ts. Hanizam Bin Hashim, Profesor Madya Ts. Dr. Mohd Shukor Bin Salleh, Omar M.Z., , Sulong A.B.

Optimisation Of Mechanical Stir Casting Parameters For Fabrication Of Carbon Nanotubes‐Aluminium Alloy Composite Through Taguchi Method, Source Title: Journal of Materials Research and Technology, Volume: 8, Issue No.2, Article ID/No:, ISSN:22387854

 

 

Article

 

 

2019

Profesor Madya Ir. Dr. Mohd Hadzley Bin Abu Bakar, Ts. Nor Fauzi Bin Tamin, Profesor Madya Ts. Dr. Umar Al‐Amani Bin Haji Azlan, Anis Afuza Binti Azhar, Muhammad Faiz Bin Mokhtar, Muhamad Naim Fahmi Bin Abdul Manap

Effect Of Sintering Temperature On Density, Hardness And Tool Wear For Alumina‐Zirconia Cutting Tool, Source Title: JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, Volume: 13, Issue No.1, Article ID/No:, ISSN:2289‐4659

 

 

Article

 

 

2019

 

Mohamed Saiful Firdaus Bin Hussin, Halyani Binti Mohd Yassim, Nursabillilah Binti Mohd Ali, Fauzi M.A., Ismail Z., Rosli F.F.

Conceptual Design Approach And Ergonomics Analysis Of Fire Resistant Purpose Shield, Source Title: ARPN Journal of Engineering and Applied Sciences, Volume: 14, Issue No.6, Article ID/No:, ISSN:18196608

 

 

Article

 

 

2019

 

Nur Dalilah Binti Johari, Profesor Madya Ts. Dr. Zulkifli Bin Mohd Rosli, Profesor Madya Dr Jariah Binti Mohamad Juoi, Nurul Shuhadah Binti Abd Yazid Comparison On The Tio2 Crystalline Phases Deposited Via Dip And Spin Coating Using Green Sol‐Gel Route, Source Title: Journal of Materials Research and Technology, Volume: 8, Issue No.2, Article ID/No:, ISSN:22387854

 

 

Article

 

 

2019

 

Najiyah Safwa Binti Khashi'Ie, Arifin N.M., , Nazar R., , Hafidzuddin E.H., , Wahi N., , Pop I.

A Stability Analysis For Magnetohydrodynamics Stagnation Point Flow With Zero Nanoparticles Flux Condition And Anisotropic Slip, Source Title: Energies, Volume: 12, Issue No.7, Article ID/No:1268, ISSN:19961073

 

 

Article

 

 

2019

 

Mohamad Fani Bin Sulaima, Dahlan N.Y., , Mohamed Hafiz Bin Md Isa, Muhammad Nur Bin Othman, Yasin Z.M., , Dr. Hyreil Anuar Bin Kasdirin

Etou Electricity Tariff For Manufacturing Load Shifting Strategy Using Aco Algorithm, Source Title: Bulletin of Electrical Engineering and Informatics, Volume: 8, Issue No.1, Article ID/No:, ISSN:20893191

 

 

Article

 

 

2019

 

Nurul Shuhadah Binti Abd Yazid, Profesor Madya Ts. Dr. Zulkifli Bin Mohd Rosli, Profesor Madya Dr Jariah Binti Mohamad Juoi

Effect Of Titanium (Iv) Isopropoxide Molarity On The Crystallinity And Photocatalytic Activity Of Titanium Dioxide Thin Film Deposited Via Green Sol‐Gel Route, Source Title: Journal of Materials Research and Technology, Volume: 8, Issue No.1, Article ID/No:, ISSN:22387854

 

 

Article

 

 

2019


 

 

Title                                                                                                                                                                                                                                       Document Type                                                                                                                                                                                                                       Year

 

Chow Khoon Keat, Ali Mohammed Abdal‐Kadhim, Profesor Madya Dr Kok Swee Leong, Profesor Madya Ts. Dr. Lau Kok Tee

Finite Elements Method Simulation Of P(Vdf‐Trfe) Piezoelectric Sensor For Internet Of Things Application, Source Title: INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, Volume: 11, Issue No.1, Article ID/No:, ISSN:2229‐838X

 

 

Article

 

 

2019

Dayanasari Binti Abdul Hadi, Aiman Zakwan Bin Jidin, Ts. Dr. Norfariza Binti Ab Wahab, Ts. Madiha Binti Zahari, Nurliyana Binti Abd. Mutalib, Ts. Siti Halma Binti Johari, Ts. Suziana Binti Ahmad, Nuzaimah Bte Mustafa

Cmos Ring Oscillator Delay Cell Performance: A Comparative Study, Source Title: International Journal of Electrical and Computer Engineering, Volume: 9, Issue No.3, Article ID/No:, ISSN:20888708

 

 

Article

 

 

2019

Ng Lin Feng, Profesor Madya Dr Sivakumar A/L Dhar Malingam, Profesor Madya Dr Mohd Zulkefli Bin Selamat, Dr. Zaleha Binti Mustafa, Ts. Dr. Omar Bin Bapokutty

A Comparison Study On The Mechanical Properties Of Composites Based On Kenaf And Pineapple Leaf Fibres, Source Title: Polymer Bulletin, Volume: , Issue No., Article ID/No:, ISSN:1700839

 

 

Article in Press

 

 

2019

 

Afirah Binti Taufik, Profesor Madya Dr Sharifah Sakinah Binti Syed Ahmad, Ezzatul Farhain Binti Azmi

Classification Of Landsat 8 Satellite Data Using Unsupervised Methods, Source Title: Lecture Notes in Networks and Systems, Volume: 67, Issue No., Article ID/No:, ISSN:23673370

 

 

Book Chapter

 

 

2019

 

Noryani Binti Muhammad, Sapuan S.M., , Dr. Mastura Binti Mohammad Taha, Zuhri M.Y.M., , Zainudin E.S.

Material Selection Of Natural Fibre Using A Stepwise Regression Model With Error Analysis, Source Title: Journal of Materials Research and Technology, Volume: 8, Issue No.3, Article ID/No:, ISSN:22387854

 

 

Article

 

 

2019

 

Najiyah Safwa Binti Khashi'Ie, Arifin N.M., , Hafidzuddin E.H., , Wahi N.

Dual Stratified Nanofluid Flow Past A Permeable Shrinking/Stretching Sheet Using A Non‐Fourier Energy Model, Source Title: Applied Sciences (Switzerland), Volume: 9, Issue No.10, Article ID/No:2124, ISSN:20763417

 

 

Article

 

 

2019

 

Ilyas R.A., , Sapuan S.M., , Ibrahim R., Abral H., , Ishak M.R., Zainudin E.S., , Asrofi M., Atikah M.S.N., , Huzaifah M.R.M, Radzi A.M., Azammi A.M.N., Mohd Adrinata Bin Shaharuzaman, Nurazzi N.M., , Syafri E., , Sari N.H., , Norrrahim M.N.F., , Dr. Ridhwan Bin Jumaidin

Sugar Palm (Arenga Pinnata (Wurmb.) Merr) Cellulosic Fibre Hierarchy: A Comprehensive Approach From Macro To Nano Scale, Source Title: Journal of Materials Research and Technology, Volume: 8, Issue No.3, Article ID/No:, ISSN:22387854

 

 

Article

 

 

2019

 

Profesor Madya Ir. Ts. Dr. Mohd Yuhazri Bin Yaakob, Paramananthan A/L Balakrishnan, Mohd Amirhafizan Bin Husin, Hasoloan Haery Ian Pieter

Coconut Fiber Panel Towards Acoustical Performance, Source Title: International Journal of Mechanical and Mechatronics Engineering, Volume: 19, Issue No.2, Article ID/No:, ISSN:22272771

 

 

Article

 

 

2019


 

 

Title                                                                                                                                                                                                                                       Document Type                                                                                                                                                                                                                       Year

Fadhlur Rahim Bin Azmi, Profesor Dato' Dr. Abu Bin Abdullah, Profesor Madya Dr Haslinda Binti Musa, Profesor Madya Ts. Dr. Wan Hasrulnizzam Bin Wan Mahmood

Perception Of Food Manufacturers Towards Adoption Of Halal Food Supply Chain In Malaysia: Exploratory Factor Analysis, Source Title: Journal of Islamic Marketing, Volume: , Issue No., Article ID/No:, ISSN:17590833

 

 

Article in Press

 

 

2019

 

Iskandar Bin Waini, Ishak A., , Pop I.

Hybrid Nanofluid Flow And Heat Transfer Over A Nonlinear Permeable Stretching/Shrinking Surface, Source Title: International Journal of Numerical Methods for Heat and Fluid Flow, Volume: , Issue No., Article ID/No:, ISSN:9615539

 

 

Article in Press

 

 

2019

 

Mohd Shahrom Bin Ismail, Dr. Olawale Friday Ifayefunmi, Dr. Siti Hajar Binti Sheikh Md Fadzullah

Buckling Of Imperfect Cylinder‐Cone‐Cylinder Transition Under Axial Compression, Source Title: Thin‐Walled Structures, Volume: 144, Issue No., Article ID/No:106250, ISSN:0263‐8231

 

 

Article

 

 

2019

 

Dr. Olawale Friday Ifayefunmi

Plastic Buckling Of Axially Compressed Cylinders: Correlation Between Theory And Experiments, Source Title: International Journal of Mechanical and Production Engineering Research and Development, Volume: 9, Issue No.2, Article ID/No:IJMPERDAPR201956, ISSN:22496890

 

 

Article

 

 

2019

 

Nuzaimah Bte Mustafa, Sapuan S.M., , Dr. Nadlene Binti Razali, Jawaid M.

Microstructure And Mechanical Properties Of Unsaturated Polyester Composites Filled With Waste Rubber Glove Crumbs, Source Title: Fibers and Polymers, Volume: 20, Issue No.6, Article ID/No:, ISSN:1229‐9197

 

 

Article

 

 

2019

 

Mohd Qadafie Bin Ibrahim, Romli F.I., , Alli H.

An Investigation On Aesthetic Acknowledgment And Adaptation In Product Design Process Among Engineering Students In Malaysian Universities, Source Title: International Journal of Innovative Technology and Exploring Engineering, Volume: 8, Issue No.7, Article ID/No:, ISSN:22783075

 

 

Article

 

 

2019

 

Ts. Nur Rashid Bin Mat Nuri @ Md Din, Hudha K., , Mazlan S.A.

Design And Simulation Of A New Single Actuator Double Acting Electro‐Mechanical Continuously Variable Transmission, Source Title: International Journal of Mechanical Engineering and Robotics Research, Volume: 8, Issue No.1, Article ID/No:, ISSN:22780149

 

 

Article

 

 

2019

 

Mazliah Binti Mazlan, Profesor Madya Dr Noraiham Binti Mohamad, Hairul Effendy Bin Ab Maulod, Ts. Dr. Jeefferie Bin Abd Razak, Profesor Madya Ir. Dr. Mohd Asyadi 'Azam Bin Mohd Abid, Khairu Ilwani Binti Karim, Mazlin Aida Binti Mahamood, Hamdan M.M.

Optimization Of Physical And Mechanical Properties Of Glycerol ‐ Modified Natural Rubber/Starch ‐ Filled Carbon Black Composites Using Two Level Factorial Design, Source Title: Journal of Mechanical Engineering and Sciences, Volume: 13, Issue No.2, Article ID/No:, ISSN:22894659

 

 

 

Article

 

 

 

2019


 

 

Title                                                                                                                                                                                                                                       Document Type                                                                                                                                                                                                                       Year

 

Ts. Dr. Ahmad Fuad Bin Ab Ghani, Samsudin A.H., , Sharom S.D.M., , Lu Y., , Mahmud J.

Effects Of Laminate Arrangement On The Failure Behaviour Of Hybrid Composite Plates Under Transverse Sinusoidal Load, Source Title: International Journal on Advanced Science, Engineering and Information Technology, Volume: 9, Issue No.3, Article ID/No:, ISSN:20885334

 

 

Article

 

 

2019

 

Iskandar Bin Waini, Ishak A., , Pop I.

On The Stability Of The Flow And Heat Transfer Over A Moving Thin Needle With Prescribed Surface Heat Flux, Source Title: Chinese Journal of Physics, Volume: 60, Issue No., Article ID/No:, ISSN:5779073

 

 

Article

 

 

2019

 

Arzadtul Ruziya Binti Zolkaply, Profesor Madya Ir. Dr. Mohd Rizal Bin Alkahari, Dr. Faiz Redza Bin Ramli, Noor Saffreena Bt Hamdan

Mechanical Properties Of 3D Printed Surface Under Influence Of Chemical Post Processing, Source Title: International Journal of Recent Technology and Engineering, Volume: 8, Issue No.1, Article ID/No:, ISSN:22773878

 

 

Article

 

 

2019

Mohammad Khalid Bin Wahid, Ir. Ts. Mohd Nazri Bin Ahmad, Ts. Mohd Hairizal Bin Osman, Nurul Ain Binti Maidin, Mohd Hidayat Bin Ab Rahman, Mohamed Saiful Firdaus Bin Hussin, Ir. Ts. Mohammad `Afif Bin Kasno

Development Of Biodegradable Plastics For Packaging Using Wastes From Oil Palm And Sugar Cane, Source Title: International Journal of Recent Technology and Engineering, Volume: 8, Issue No.1, Article ID/No:, ISSN:22773878

 

 

Article

 

 

2019

 

Ts. Syahrul Azwan Bin Sundi @ Suandi, Ts. Muhammad Syafik Bin Jumali, Ts. Mohd Razali Bin Md Yunos, Zamri Bin Ahmad

Design & Development Of Smart Clothes Drying System (Scds), Source Title: International Journal of Recent Technology and Engineering, Volume: 8, Issue No.1, Article ID/No:, ISSN:22773878

 

 

Article

 

 

2019

Nurul Ain Binti Maidin, Mohd Hidayat Bin Ab Rahman, Ir. Ts. Mohd Nazri Bin Ahmad, Ts. Mohd Hairizal Bin Osman, Mohammad Khalid Bin Wahid, Muhammad Bin Abdul Latiff, Siti Nur Humaira Binti Mazlan

Airco Wind Turbine Prototype Design And Development, Source Title: International Journal of Recent Technology and Engineering, Volume: 8, Issue No.1, Article ID/No:, ISSN:22773878

 

 

Article

 

 

2019

 

Noor Saffreena Bt Hamdan, Nur Farah Bazilah Binti Wakhi Anuar, Ts. Dr. Kamarul Bin Amir Mohamed, Siti Nor'Ain Binti Mokhtar, Khairul Azri Bin Azlan Automatic Damper System For Energy Saving In Small Office Building : A Survey And Trainer Kit Development, Source Title: IOP Conference Series: Earth and Environmental Science, Volume: 268, Issue No.1, Article ID/No:12125, ISSN:17551307

 

 

Conference Paper

 

 

2019

 

Dr. Olawale Friday Ifayefunmi, Fairuz Mardhiah Binti Mahidan , Wang Sheng Hue

Buckling Of Cones With Imperfect Length Subjected To Axial Compression, Source Title: International Journal of Mechanical and Production Engineering Research and Development, Volume: 9, Issue No.4, Article ID/No:IJMPERDAUG201923, ISSN:22496890

 

 

Article

 

 

2019

 

Dr. Nur Hazwani Binti Mokhtar, Takada H., , Matsuura Y.

Driver Respond To Pre‐Collision Scenario At Intersection In Autonomous Vehicle, Source Title: Journal of Advanced Manufacturing Technology, Volume: 13, Issue No.1, Article ID/No:, ISSN:19853157

 

 

Article

 

 

2019


 

 

Title                                                                                                                                                                                                                                       Document Type                                                                                                                                                                                                                       Year

 

Profesor Madya Ir. Dr. Mohd Hadzley Bin Abu Bakar, Muhamad Naim Fahmi Bin Abdul Manap, Ts. Nor Fauzi Bin Tamin, Anis Afuza Binti Azhar, Profesor Madya Dr Raja Izamshah Bin Raja Abdullah, Profesor Madya Dr Mohd Shahir Bin Kasim, Profesor Madya Ir. Dr. Mohd Amran Bin Md Ali, Shamsudin, Noorazizi, Raffi, Nurul Fatin,

Surface Integrity Study For Fc300 Cast Iron Using Tiain Ball End Mill, Source Title: JURNAL TRIBOLOGI, Volume: 21, Issue No., Article ID/No:, ISSN:2289‐7232

 

 

Article

 

 

2019

 

Dr. Suhaila Binti Mohd Najib, Norshahida Binti Hassan, Nur Tysha Atikah Binti Mohd Shair, Norain Binti Rahim, Ts. Dr. Norfariza Binti Ab Wahab

Intelligent Neonatal Monitoring System Based On Android Application Using Multi Sensors, Source Title: ISCAIE 2019 ‐ 2019 IEEE Symposium on Computer Applications and Industrial Electronics, Volume: , Issue No., Article ID/No:8743867, ISSN:

 

 

Conference Paper

 

 

2019

 

Isa M.R., , Suhaimi A.B., , Zaroog O.S., , Zahari N.M.,, Saiful Naim Bin Sulaiman , Ismail I.N., , Mohamed H.

Characterization Of Mechanical Properties On Natural Fibre Reinforced Polymer Using Kenaf And Polyurethane, Source Title: AIP Conference Proceedings, Volume: 2129, Issue No., Article ID/No:20039, ISSN:0094243X

 

 

Conference Paper

 

 

2019

 

Ts. Dr. Ahmad Fuad Bin Ab Ghani, Profesor Madya Ir. Ts. Dr. Mohd Yuhazri Bin Yaakob, Dr. Nor Salim Bin Muhammad, Mahmud J.

Hardness Assessment Of Hybrid Composite Cfrp And Gfrp, Source Title: International Journal of Recent Technology and Engineering, Volume: 8, Issue No.1, Article ID/No:, ISSN:22773878

 

 

Article

 

 

2019

 

Rahmat M.S.,, Hudha K., , Kadir Z.A., Ts. Nur Rashid Bin Mat Nuri @ Md Din, Amer N.H., , Abdullah S.

Comparison Of Control Strategy On Magneto‐Rheological Fluid Damper Performance For Impact Reduction, Source Title: IOP Conference Series: Materials Science and Engineering, Volume: 530, Issue No.1, Article ID/No:12032, ISSN:17578981

 

 

Conference Paper

 

 

2019

 

Hudha K., Ts. Nur Rashid Bin Mat Nuri @ Md Din, Mazlan S.A.

Multi‐Objective Optimization Of Vehicle Speed Control Using Gravitational Search Algorithm For Electro‐Mechanical Continuously Variable Transmission, Source Title: IOP Conference Series: Materials Science and Engineering, Volume: 530, Issue No.1, Article ID/No:12031, ISSN:17578981

 

 

Conference Paper

 

 

2019

 

Khairum Bin Hamzah, Nik Long N.M.A., , Senu N., , Eshkuvatov Z.K., , Ilias M.R.

Stress Intensity Factors For A Crack In Bonded Dissimilar Materials Subjected To Various Stresses, Source Title: Universal Journal of Mechanical Engineering, Volume: 7, Issue No.4, Article ID/No:, ISSN:23323353

 

 

Article

 

 

2019

 

Najiyah Safwa Binti Khashi'Ie, Arifin N.M., , Hafidzuddin E.H., , Wahi N., , Ilias M.R.

Magnetohydrodynamics (Mhd) Flow And Heat Transfer Of A Doubly Stratified Nanofluid Using Cattaneo‐Christov Model, Source Title: Universal Journal of Mechanical Engineering, Volume: 7, Issue No.4, Article ID/No:, ISSN:23323353

 

 

Article

 

 

2019


 

 

Title                                                                                                                                                                                                                                       Document Type                                                                                                                                                                                                                       Year

 

Iskandar Bin Waini, Ishak, Anuar, Pop, Ioan

Flow And Heat Transfer Along A Permeable Stretching/Shrinking Curved Surface In A Hybrid Nanofluid, Source Title: PHYSICA SCRIPTA, Volume: 94, Issue No.10, Article ID/No:, ISSN:0031‐8949

 

 

Article

 

 

2019

 

Profesor Madya Dr Sivakumar A/L Dhar Malingam, Ng Lin Feng , Anita Akmar Binti Kamarolzaman, Hong Tzy Yi , Ts. Dr. Ahmad Fuad Bin Ab Ghani Mechanical Characterisation Of Woven Kenaf Fabric As Reinforcement For Composite Materials, Source Title: JOURNAL OF NATURAL FIBERS, Volume: , Issue No., Article ID/No:, ISSN:1544‐0478

 

 

Early Access

 

 

2019

 

Mohd Soufhwee Bin Abd Rahman, Profesor Madya Ts. Dr. Effendi Bin Mohamad, Ir. Dr.‐Ing. Azrul Azwan Bin Abdul Rahman

Enhancement Of Time‐Driven Activity–Based Costing (Tdabc) By Using Simulation In Manufacturing Process Towards Industry 4.0, Source Title: International Journal of Innovative Technology and Exploring Engineering, Volume: 8, Issue No.10, Article ID/No:, ISSN:22783075

 

 

Article

 

 

2019

 

Dr. Mastura Binti Mohammad Taha, Sapuan S.M., , Noryani Binti Muhammad

Material Selection Of Natural Fibers For Composite Automotive Component Using Analytic Hierarchy Process/Analytic Network Process In Concurrent Engineering Approach, Source Title: Key Engineering Materials, Volume: 801 KEM, Issue No., Article ID/No:, ISSN:10139826

 

 

Conference Paper

 

 

2019

 

Nor F.M., Dr. Fairul Azni Bin Jafar, Sin C.K., Profesor Madya Ir. Dr. Mohd Hadzley Bin Abu Bakar, Noor A.Z.M.

The Effect Of Automated Coolant System On Surface Roughness During Machining Aluminium Alloy, Source Title: International Journal of Recent Technology and Engineering, Volume: 8, Issue No.2, Article ID/No:, ISSN:22773878

 

 

Article

 

 

2019

 

Mohd Khairul Nizam Bin Suhaimin , Profesor Madya Dr Zuhriah Binti Ebrahim, Profesor Datuk Ts. Dr. Mohd Razali Bin Muhamad, Profesor Madya Ts. Dr. Wan Hasrulnizzam Bin Wan Mahmood, Profesor Madya Ts. Dr. Massila Binti Kamalrudin, Halimaton Saadiah Binti Hakimi

Effects Of Resistance Heating Parameters On Spring Steel By Using Design Of Experiment, Source Title: International Journal of Recent Technology and Engineering, Volume: 8, Issue No.1C2, Article ID/No:, ISSN:22773878

 

 

Article

 

 

2019

 

Ir. Ts. Mohd Nazri Bin Ahmad, Ts. Mohammad Khalid Bin Wahid, Nurul Ain Binti Maidin, Mohd Hidayat Bin Ab Rahman, Ts. Mohd Hairizal Bin Osman, Izzati Fatin Binti Alis @ Elias

A Complete Denture By Rapid Prototyping With Reverse Engineering Approach, Source Title: International Journal of Mechanical and Mechatronics Engineering, Volume: 19, Issue No.3, Article ID/No:, ISSN:22272771

 

 

Article

 

 

2019

 

Nurhanis Binti Lokmanulhakim , Ts. Wan Norhisyam Bin Abd Rashid, Nor Hafizah Binti Hussin, Mohd Fariduddin Bin Mukhtar

Experiment Study Of Using Parallel Plate Sensor For The Detection Of Conductive Material, Source Title: International Journal of Electrical and Computer Engineering, Volume: 9, Issue No.6, Article ID/No:, ISSN:20888708

 

 

Article

 

 

2019


 

 

Title                                                                                                                                                                                                                                       Document Type                                                                                                                                                                                                                       Year

 

Ab Wafi Bin Ab Aziz, Ir. Ts. Mohammad `Afif Bin Kasno, Ain Nurkamilia Binti Kamarudin , Ts. Mohd Zaidi Bin Mohd Tumari, Profesor Madya Dr Mohd Shahrieel Bin Mohd Aras, Herdy Rusnandi , Ts. Mohd Kamal Bin Musa

An Accurate Pattern Classification For Empty Fruit Bunch (Efb) Based On The Age Profile Of Oil Palm Tree Using Neural Network, Source Title: International Journal of Electrical and Computer Engineering, Volume: 9, Issue No.6, Article ID/No:, ISSN:20888708

 

 

Article

 

 

2019

 

Isa M.R., , Saiful Naim Bin Sulaiman , Zaroog O.S., , , ,

Experimental And Simulation Method Of Introducing Compressive Residual Stress In Astm A516 Grade 70 Steel, Source Title: Key Engineering Materials, Volume: 803 KEM, Issue No., Article ID/No:, ISSN:10139826

 

 

Conference Paper

 

 

2019

 

Najiyah Safwa Binti Khashi'Ie, Arifin N.M., , Hafidzuddin E.H., , Wahi N., ,

Mhd Mixed Convective Stagnation Point Flow With Heat Generation Past A Shrinking Sheet, Source Title: ASM Science Journal, Volume: 12, Issue No.Special Issue 1, Article ID/No:, ISSN:18236782

 

 

Article

 

 

2019

 

Najiyah Safwa Binti Khashi'Ie, Arifin N.M.,, Rashidi M.M., , Hafidzuddin E.H., , Wahi N.

Magnetohydrodynamics (Mhd) Stagnation Point Flow Past A Shrinking/Stretching Surface With Double Stratification Effect In A Porous Medium, Source Title: Journal of Thermal Analysis and Calorimetry, Volume: , Issue No., Article ID/No:, ISSN:1388‐6150

 

 

Article in Press

 

 

2019

Ilyas R.A., , Sapuan S.M., , Ibrahim R., , Abral H., Ishak M.R., , Zainudin E.S., Atikah M.S.N., , Mohd Nurazzi N, Atiqah A., , Ansari M.N.M, Syafri E., , Asrofi M., , Sari N.H., , Dr. Ridhwan Bin Jumaidin

Effect Of Sugar Palm Nanofibrillated Celluloseconcentrations On Morphological, Mechanical Andphysical Properties Of Biodegradable Films Basedon Agro‐ Waste Sugar Palm (Arenga Pinnata(Wurmb.) Merr) Starch, Source Title: Journal of Materials Research and Technology, Volume: , Issue No., Article ID/No:, ISSN:2238‐7854

 

 

Article in Press

 

 

2019

 

Umi Hayati Binti Ahmad, Mohd Hidayat Bin Ab Rahman, Lum Yee Sin , Nurul Ain Binti Maidin, Nur Farah Bazilah Binti Wakhi Anuar

Development On Orthotics Insole For Flat Feet Focusing On Sport Usage Evaluated By Electromyography, Source Title: INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, Volume: 11, Issue No.4, Article ID/No:, ISSN:2229‐838X

 

 

Article

 

 

2019


 

 

Title                                                                                                                                                                                                                                       Document Type                                                                                                                                                                                                                       Year

Ir. Ts. Mohd Nazri Bin Ahmad, Nurul Ain Binti Maidin, Mohd Hidayat Bin Ab Rahman, Ts. Mohd Hairizal Bin Osman, Ts. Mohammad Khalid Bin Wahid, Mohamad Faris Bin Mohd Basir

Shrinkage Effect Of Vacuum Casting Process Parameters Using Taguchi Method, Source Title: INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, Volume: 11, Issue No.3, Article ID/No:, ISSN:2229‐838X

 

 

Article

 

 

2019

Ts. Siti Halma Binti Johari, Ts. Dr. Norfariza Binti Ab Wahab, Nurliyana Binti Abd. Mutalib, Ts. Suziana Binti Ahmad, Dayanasari Binti Abdul Hadi, Ts. Madiha Binti Zahari, Norlezah Binti Hashim, Mazlan, Mazwin

Development Of A Power Generator System Using Thermal Waste From A Car, Source Title: INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, Volume: 11, Issue No.4, Article ID/No:, ISSN:2229‐838X

 

 

Article

 

 

2019

Nurliyana Binti Abd. Mutalib, Ts. Dr. Rostam Affendi Bin Hamzah, Navine A/L Arumugam, Ts. Madiha Binti Zahari, Dayanasari Binti Abdul Hadi, Ts. Siti Halma Binti Johari, Ts. Dr. Norfariza Binti Ab Wahab, Ts. Suziana Binti Ahmad

Development Of Shoe Dryer System Using Microcontroller With Gsm Module, Source Title: INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, Volume: 11, Issue No.3, Article ID/No:, ISSN:2229‐838X

 

 

Article

 

 

2019

 

Atikah M.S.N., Ilyas R.A., , Sapuan S.M., , Ishak M.R., Zainudin E.S., , Ibrahim R, Atiqah A., , Ansari M.N.M, Dr. Ridhwan Bin Jumaidin

Degradation And Physical Properties Of Sugar Palm Starch/Sugar Palm Nanofibrillated Cellulose Bionanocomposite, Source Title: Polimery/Polymers, Volume: 64, Issue No.10, Article ID/No:, ISSN:322725

 

 

Article

 

 

2019