TITLE

YEAR

CATEGORY

Lim Zhi Ying , Profesor Madya Dr Azma Putra , Profesor Datuk Ir. Dr. Mohd Jailani Bin Mohd Nor , Profesor Madya Ir. Dr. Mohd Yuhazri Bin Yaakob , Sound absorption performance of natural kenaf fibres,Applied Acoustics, 130, PP107‐114, ISSN 0003‐682X.

 

2018

 

Article

Maziati Akmal Bt Mat Harttar@Mohd Hatta , Profesor Madya Dr Mohd Warikh Bin Abd Rashid , Profesor Madya Dr Umar Al‐Amani Bin Haji Azlan , Nurul Azuwa Binti Azmi , Dr. Mohd Shukor Bin Salleh , Dr. Mohd Shahir Bin KasimOptimizing the processing conditions of sodium potassium niobate thin films prepared by sol‐ gel spin coating technique,Ceramics International, 44, PP317‐325, ISSN 0272‐8842.

 

2018

 

Article

Sivagurunathan, R. , Lau Tze Way, S , Sivagurunathan, L. , Profesor Madya Ir. Dr. Mohd Yuhazri Bin YaakobThe Effects of Triggering Mechanisms on the Energy Absorption Capability of Circular Jute/Epoxy Composite Tubes under Quasi‐Static Axial Loading,Applied Composite Materials, ‐, PP1‐17, ISSN 0929189X.

 

2018

 

Article in Press

Halyani Binti Mohd Yassim , Mohamed Saiful Firdaus Bin Hussin , Maslan Bin Zainon , Emy Zairah Binti Ahmad , Norain Binti IdrisModelling and simulation of a wind turbine with doubly fed induction generator in full load operation,ARPN Journal of Engineering and Applied Sciences, 13, PP57‐63, ISSN 18196608.

 

2018

 

Article

Chow Khoon Keat , Profesor Madya Dr Kok Swee Leong , Dr. Lau Kok TeeDesign and characterization of piezoelectric P(VDF‐TrFE) thick film on flexible substrate for energy harvesting,Journal of Telecommunication, Electronic and Computer Engineering, 10, PP63‐68, ISSN 21801843.

 

2018

 

Article

Musthaffa A.A. , Nor N.M. , Yusof M.A. , Profesor Madya Ir. Dr. Mohd Yuhazri Bin YaakobNew conceptual design of portable bamboo bridge for emergency purposes,AIP Conference Proceedings, 1930, PP‐‐‐, ISSN 0094243X.

 

2018

 

Conference Paper

Azhar M.A. , Din M.F.M. , Profesor Madya Dr Muhammad Zahir Bin Hassan , Ishak M.T. , Norizan Y.N.A. , Rahman M.R.A.Study on Gadolinium and LaFe11.5Si1.5 compound as refrigerant for magnetic refrigerator application,AIP Conference Proceedings, 1930, PP‐‐‐, ISSN 0094243X.

 

2018

 

Conference Paper

Dr. Lau Kok Tee , Profesor Madya Dr Mohd Asyadi 'Azam Bin Mohd Abid , Raja Noor Amalina Binti Raja SemanInfluence of pulsed electrophoretic deposition of graphitic carbon nanotube on electrochemical capacitor performance,Journal of Engineering Science and Technology, 13, PP295‐308, ISSN 18234690.

 

2018

 

Article

Nurul Amira Binti Zainal , Ariff Bin Md Sullah , Ezzatul Farhain Binti Azmi , Muhammad Shahril Bin Ahmad , Performance evaluation of fluid flow in a straight pipe of heat exchanger,ARPN Journal of Engineering and Applied Sciences, 13, PP929‐933, ISSN 18196608.

 

2018

 

Article

Profesor Madya Dr Sivakumar A/L Dhar Malingam , Kathiravan S/O Subramaniam , Ng Lin Feng , Dr. Mohd Basri Bin Ali , Profesor Madya Dr Mohd Zulkefli Bin Selamat , Profesor Ir. Dr. Sivarao A/L Subramonian , Dr. Omar Bin BapokuttyExperimental investigation on charpy impact response of kenaf bast fibre reinforced metal laminate system,ARPN Journal of Engineering and Applied Sciences, 13, PP822‐827, ISSN 18196608.

 

2018

 

Article

Mastura Binti Mohammad Taha , Sapuan S.M. , Dr. Muhd Ridzuan Bin Mansor , Nuraini A.A.Materials selection of thermoplastic matrices for ‘green’ natural fibre composites for automotive anti‐roll bar with particular emphasis on the environment,International Journal of Precision Engineering and Manufacturing ‐ Green Technology, 5, PP111‐119, ISSN 22886206.

 

2018

 

Article

Febrian Bin Idral , Ahmad Fuad Bin Ab Ghani , Nur Amanina Syazwani Binti Aseri , Tan Chee Teck , Nur Aliyah Binti Abdul Mutalib , Mohd Aiman Bin Mohd Fadzil , Muhamad Dzulhisham Bin IdrisConceptual Design for an Anti‐Thief Donation Box,MATEC Web of Conferences, 150, PP‐‐‐, ISSN 2261236X.

 

2018

 

Conference Paper

Profesor Madya Dr Mohd Zulkefli Bin Selamat , Muhammad Syazwan Zhafri Bin Hj Tahar , Ayu Natasha Binti Kasim , Profesor Madya Dr Sivakumar A/L Dhar Malingam , Profesor Madya Dr Azma Putra , Profesor Madya Ir. Dr. Mohd Yuhazri Bin Yaakob , Profesor Madya Dr Mohd Ahadlin Bin Mohd DaudEffect of starch sizes particle as binder on short pineapple leaf fiber composite mechanical properties,MATEC Web of Conferences, 150, PP‐‐‐, ISSN 2261236X.

 

 

2018

 

 

Conference Paper


 

 

TITLE

YEAR

CATEGORY

Profesor Madya Ir. Dr. Mohd Hadzley Bin Abu Bakar , Muhammad Faiz Bin Mokhtar , Muhamad Naim Fahmi Bin Abdul Manap , Nor Fauzi Bin Tamin , Profesor Madya Dr Umar Al‐Amani Bin Haji Azlan , Abdul Aziz Bin Adam , Profesor Madya Dr Raja Izamshah Bin Raja Abdullah , Dr. Mohd Shahir Bin KasimFabrication and Machining Performance of Powder Compacted Alumina Based Cutting Tool,MATEC Web of Conferences, 150, PP‐‐‐, ISSN 2261236X.

 

 

2018

 

 

Conference Paper

Profesor Madya Dr. Ir. Abdul Talib Bin Din , Khairul Azri Bin AzlanDevelopment of Low‐Cost Solar Water Heater Using Recycled Solid Waste for Domestic Hot Water Supply,MATEC Web of Conferences, 150, PP‐‐‐, ISSN 2261236X.

 

2018

 

Conference Paper

Dr. Shamsul Anuar Bin Shamsudin , Dominic Merikan B. , Dr. Safarudin Gazali Herawan , Profesor Madya Juhari Bin Ab RazakA study on the use of renewable energy for coconut dehusking,MATEC Web of Conferences, 150, PP‐‐‐, ISSN 2261236X.

 

2018

 

Conference Paper

Dr. Fauzi Bin Ahmad , Hudha K. , Mazlan S.A. , Jamaluddin H. , Aparow V.R. , Mohd Razali Bin Md YunosSimulation and experimental investigation of vehicle braking system employing a fixed caliper based electronic wedge brake,Simulation, 94, PP327‐340, ISSN 375497.

 

2018

 

Article

Nur Syafiqah Binti Rayme , Profesor Madya Dr Seri Rahayu Binti Kamat , Dr. Syamimi Binti Shamsuddin , Profesor Madya Dr Wan Hasrulnizzam Bin Wan Mahmood , Noor'Ain Binti AzizanA preliminary study of body discomforts of hand lay‐up process workers in composite manufacturing,Advances in Intelligent Systems and Computing, 739, PP510‐519, ISSN 21945357.

 

2018

 

Conference Paper

Profesor Madya Ir. Dr. Mohd Yuhazri Bin Yaakob , Wan Nur Hidayah Binti Wan Yaacob , Hasoloan Haery Lan Pieter , Dr. Saifudin Hafiz Bin Yahaya , Sulaiman S. , Kamarul Bin Amir MohamedKansei Engineering Approach for the Customers Preferences of Car Design,Advances in Intelligent Systems and Computing, 739, PP289‐ 295, ISSN 21945357.

 

2018

 

Conference Paper

Leang Suh Huah , Profesor Madya Dr Wan Hasrulnizzam Bin Wan Mahmood , Dr. Muhamad Arfauz Bin A RahmanThe impact of manufacturing complexity drivers on performance‐a preliminary study,IOP Conference Series: Materials Science and Engineering, 328, PP‐‐‐, ISSN 17578981.

 

2018

 

Conference Paper

Nurul Amira Binti Zainal , Ezzatul Farhain Binti Azmi , Mohd Arifin Bin Samad , Effect of inlet cone pipe angle in catalytic converter,IOP Conference Series: Materials Science and Engineering, 328, PP‐‐‐, ISSN 17578981.

 

2018

 

Conference Paper

Rosmia Binti Mohd Amman , Profesor Madya Dr Sivakumar A/L Dhar Malingam , Dr. Ismail Bin Abu Shah , Mohd Faizal Bin HalimEffects of mapping on the predicted crash response of circular cup‐shape part,Defence S and T Technical Bulletin, 11, PP25‐35, ISSN 19856571.

 

2018

 

Article

Dr. Nor Salim Bin Muhammad , Dr. Abd Rahman Bin Dullah , Ahmad Fuad Bin Ab Ghani , Profesor Madya Dr Roszaidi Bin Ramlan , Dr. Ruztamreen Bin Jenal Rapid defect screening on plate structures using infrared thermography,Defence S and T Technical Bulletin, 11, PP49‐56, ISSN 19856571.

 

2018

 

Article

Sivagurunathan R. , Way S.L.T. , Sivagurunathan L , Profesor Madya Ir. Dr. Mohd Yuhazri Bin YaakobEffects of triggering mechanisms on the crashworthiness characteristics of square woven jute/epoxy composite tubes,Journal of Reinforced Plastics and Composites, 37, PP824‐840, ISSN 7316844.

 

2018

 

Article

Ahmad Fuad Bin Ab Ghani , Mahmud J. , Nazran S. , Dr. Nor Salim Bin Muhammad , Mechanical properties extraction of composite material using digital image correlation via open source Ncorr,Defence S and T Technical Bulletin, 11, PP13‐24, ISSN 19856571.

 

2018

 

Article

Profesor Madya Dr Zuhriah Binti Ebrahim , Dr. Amir Hamzah Bin Abdul Rasib , Profesor Datuk Dr. Mohd Razali Bin MuhamadInefficient Processing Time as Hidden Time Loss in Assembly Operations,Journal of Telecommunication, Electronic and Computer Engineering, 10, PP41‐45, ISSN 21801843.

 

2018

 

Article


 

 

TITLE

YEAR

CATEGORY

Mohamad Haniff Bin Harun , Mohd Firdaus Bin Mohd Ab Halim , Khalil Azha Bin Mohd Annuar , Dr. Mohd Shahrieel Bin Mohd Aras , Arman Hadi Bin Azahar , Muhamad Faizal Bin Yaakub

, Profesor Madya Dr Umar Al‐Amani Bin Haji Azlan , Amar Faiz Bin Zainal AbidinA 3D supervised shape‐based matching approach using 2D images for defect detection,ARPN Journal of Engineering and Applied Sciences, 13, PP2527‐2534, ISSN 18196608.

 

2018

 

Article

Noryani Binti Muhammad , Sapuan, S. M. , Mastura Binti Mohammad TahaMulti‐criteria decision‐making tools for material selection of natural fibre composites: A review,JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 12, PP3330‐3353, ISSN 2289‐4659.

 

2018

 

Review

Profesor Madya Ir. Dr. Mohd Yuhazri Bin Yaakob , Mohd Amirhafizan Bin Husin , Goh Chun Hsien , Hasoloan Haery Lan Pieter , Kamarul Bin Amir Mohamed , Nirmal, U.Effects of gelcoat thickness on mechanical properties of woven glass/polyester laminated composite,JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 12, PP3370‐3386, ISSN 2289‐4659.

 

2018

 

Article

Ahmad Fuad Bin Ab Ghani , Profesor Dr. Ghazali Bin Omar , Sulaiman, Muhammad Zaki , Jumahat, Aidah , Mahmud, JamaluddinElasticity deformation and failure modes behavior of hybrid composite CFRP/GFRP under tensile loading,INTERNATIONAL JOURNAL OF ADVANCED AND APPLIED SCIENCES, 5, PP98‐106, ISSN 2313‐ 626X.

 

2018

 

Article

Abu M.Y. , Norizan N.S. , Mohd Soufhwee Bin Abd RahmanIntegration of Mahalanobis‐Taguchi system and traditional cost accounting for remanufacturing crankshaft,IOP Conference Series: Materials Science and Engineering, 342, PP‐‐‐, ISSN 17578981.

 

2018

 

Conference Paper

Abu M.Y. , Mohd Nor E.E , Mohd Soufhwee Bin Abd RahmanCosting improvement of remanufacturing crankshaft by integrating Mahalanobis‐Taguchi System and Activity based Costing,IOP Conference Series: Materials Science and Engineering, 342, PP‐‐‐, ISSN 17578981.

 

2018

 

Conference Paper

Mohd Irman Bin Ramli , Nuawi M.Z. , Abdullah S. , Mohammad Rasani M.R. , Hambali Bin Boejang , Ir. Dr. Mohd Farriz Bin Hj Md Basar , Seng K.K.Comparison study on light structure modal parameter using experimental modal analysis method via PIEZOFILM sensor,Jurnal Teknologi, 80, PP87‐96, ISSN 1279696.

 

2018

 

Article

Profesor Madya Ir. Dr. Mohd Yuhazri Bin Yaakob , Mohd Amirhafizan Bin Husin , Profesor Dato' Dr. Abu Bin Abdullah , Dr. Saifudin Hafiz Bin Yahaya , Lau S.T.W. , Kamarul Bin Amir MohamedKenaf fibre composites as promising green‐composites for automotive car door map pocket application,International Journal of Mechanical and Mechatronics Engineering, 18, PP15‐21, ISSN 22272771.

 

2018

 

Article

Alphonsos A Masius , Dr. Wong Yan Chiew , Dr. Lau Kok TeeMiniature high gain slot‐fed rectangular dielectric resonator antenna for IoT RF energy harvesting,AEU ‐ International Journal of Electronics and Communications, 85, PP39‐46, ISSN 14348411.

 

2018

 

Article

Dr. Norfariza Binti Ab Wahab , Abdul Fattah Bin Abd Rahim , Abd Khahar Bin Nordin , Basri Bin Bidin , Mohd Azimin Bin Ibrahim , Nurliyana Binti Abd. MutalibDevelopment of portable linear positioning table for drilling machine,ARPN Journal of Engineering and Applied Sciences, 13, PP809‐813, ISSN 18196608.

 

2018

 

Article

Dr. Norfariza Binti Ab Wahab , Affery Bin Mohd Salleh , Abd Khahar Bin Nordin , Nor Fauzi Bin Tamin , Mohd Azimin Bin Ibrahim , Suziana Binti AhmadDevelopment of portable magnetic clamping for lathe machine,ARPN Journal of Engineering and Applied Sciences, 13, PP902‐906, ISSN 18196608.

 

2018

 

Article

Wan Norhisyam Bin Abd Rashid , Mohamad E.J., , Rahim R.A. , A Shamsul Rahimi Bin A Subki , Ahmad Fauzan Bin Kadmin , Mohd Hariz Bin Naim @ Mohayat , Mazran Bin Ahmad , Mohd Alif Bin Mohd TahDevelopment and experimental study of miniature two‐plate electrical capacitance sensor to detect dielectric material,Journal of Telecommunication, Electronic and  Computer Engineering, 10, PP5‐10, ISSN 21801843.

 

2018

 

Article

Nursabillilah Binti Mohd Ali , Albert Chan Bao Der , Christina Ko Yun Fan , Law Kok Wah , Loh Mun Loong , Profesor Ir. Dr. Marizan Bin Sulaiman , Zulhasnizam Bin Hasan , Mohamed Saiful Firdaus Bin Hussin , Dr. Sazalinsyah Bin Razali , *Meletak JawatanWearable kinesthetic system in post‐stroke rehabilitation: A review of sensor in body motions detection,Journal of Telecommunication, Electronic and Computer Engineering, 10, PP115‐120, ISSN 21801843.

 

2018

 

Article


 

 

TITLE

YEAR

CATEGORY

Dr. Olawale Friday Ifayefunmi , Ahmad Fauzan Bin Kadmin , Chang Kok Leong , Azrul Bin AzizInfluence of boundary condition on the buckling of axially compressed cones and cylinders,International Journal of Mechanical Engineering and Technology, 9, PP1106‐1116, ISSN 9766340.

 

2018

 

Article

Mohd Firdaus Bin Mohd Ab Halim , Khalil Azha Bin Mohd Annuar , Ir. Mohamad Hafiz Bin Harun , Ir. Nik Azran Bin Ab HadiAn analysis of the beneficial of energy saving device,ARPN Journal of Engineering and Applied Sciences, 13, PP2912‐2915, ISSN 18196608.

 

2018

 

Article

Mohd Sabri Bin Mohamad Zin , Ab Rahman Bin Mahmood , Profesor Madya Dr Wan Hasrulnizzam Bin Wan Mahmood , Fadhlur Rahim Bin AzmiSix Sigma analyze phase for new product development prototype process improvement,International Journal of Engineering and Technology(UAE), 7, PP79‐85, ISSN 2227524X.

 

2018

 

Article

Dr. Ridhwan Bin Jumaidin , Sapuan, Sm. , Jawaid, Mohammad , Ishak, Mohamad Ridzwan , Sahari, JaparSeaweeds as Renewable Sources for Biopolymers and its Composites: A Review,CURRENT ANALYTICAL CHEMISTRY, 14, PP249‐267, ISSN 1573‐4110.

 

2018

 

Review

Dr. Nor Azah Binti Abdul Aziz , Ong T.S. , Foong S.Y. , Senik R. , Hassan Bin AttanGreen initiatives adoption and environmental performance of public listed companies in Malaysia,Sustainability (Switzerland), 10, PP‐‐‐, ISSN 20711050.

 

2018

 

Article

Profesor Madya Dr Wan Hasrulnizzam Bin Wan Mahmood , Dr. Fatimah Al‐Zahrah Binti Mohd Sa'At , Profesor Madya Dr Seri Rahayu Binti Kamat , Ruzy Haryati Binti Hambali , Noor Amira Binti Mohd RazlamLevel of indoor air quality among Malaysian commuter users: A case study,Malaysian Journal of Public Health Medicine, 18, PP79‐88, ISSN 16750306.

 

2018

 

Article

Mohd Hidayat Bin Ab Rahman , Nurul Ain Binti Maidin , Mohd Nazri Bin Ahmad , Mohd Hairizal Bin Osman , Mohammad Khalid Bin Wahid , Mohd Fa'Iz Bin Wahid , Tan Wen HongThe study of seating pressure on car seat between two national cars,Malaysian Journal of Public Health Medicine, 18, PP135‐141, ISSN 16750306.

 

2018

 

Article

Mohd Fa'Iz Bin Wahid , Profesor Madya Dr Seri Rahayu Binti Kamat , Dr. Syamimi Binti Shamsuddin , Daruis D.D.I.Preliminary study on visual technology in human anthropometry measurement for automotive design,Malaysian Journal of Public Health Medicine, 18, PP97‐103, ISSN 16750306.

 

2018

 

Article

Muhamad Faizal Bin Yaakub , Ir. Dr. Mohd Farriz Bin Hj Md Basar , Noh F.H.M. , Hambali Bin BoejangPico‐hydro electrification from rainwater's gravitational force for urban area,Telkomnika (Telecommunication Computing Electronics and Control), 16, PP997‐1003, ISSN 16936930.

 

2018

 

Article

Ahmad Fauzan Bin Kadmin , Khairul Azha Bin A Aziz , Mohd Soufhwee Bin Abd Rahman , Siti Safwana Binti Abd Razak , Mohd Zulfadhli Bin Salehan , Ir. Nik Azran Bin Ab Hadi , Dr. Rostam Affendi Bin Hamzah , Wan Norhisyam Bin Abd RashidPerformance analysis of neural network model for automated visual inspection with robotic arm controller system,Journal of Telecommunication, Electronic and Computer Engineering, 10, PP19‐22, ISSN 21801843.

 

2018

 

Article

Dr. Olawale Friday Ifayefunmi , Dhiya Danial Bin IbrahimThe effect of material discontinuity on the flanges of axially compressed steel cones,International Journal of Mechanical Engineering and Technology, 9, PP32‐41, ISSN 9766340.

 

2018

 

Article

Noryani Binti Muhammad , Sapuan, S. M. , Dr. Mastura Binti Mohammad Taha , Zuhri, M. Y. M. , Zainudin, E. S.A Statistical Framework for Selecting Natural Fibre Reinforced Polymer Composites Based on Regression Model,FIBERS AND POLYMERS, 19, PP1039‐1049, ISSN 1229‐9197.

 

2018

 

Article

Nuzaimah Bte Mustafa , Sapuan S.M. , Dr. Nadlene Binti Razali , Jawaid M.Recycling of waste rubber as fillers: A review,IOP Conference Series: Materials Science and Engineering, 368, PP‐‐‐, ISSN 17578981.

 

2018

 

Conference Paper


 

 

TITLE

YEAR

CATEGORY

Noryani Binti Muhammad , Sapuan, S. M. , Dr. Mastura Binti Mohammad Taha , Zuhri, M. Y. M. , Zainudin, E. S.Material selection criteria for natural fibre composite in automotive component: A review,IOP Conference Series: Materials Science and Engineering, 368, PP‐‐‐, ISSN 17578981.

 

2018

 

Conference Paper

Dr. Zaiton Binti Abdul Mutalip , Kamarul Bin Amir Mohamed , Choon Zhi Gang , Ling Zhi Ji , Mohamad Shahir Bin Mohd Shapiee , Nur Syahira Binti Roslan , Teng Ping ChengDevelopment of electronic exhibition audio guide system using VLC,Journal of Telecommunication, Electronic and Computer Engineering, 10, PP141‐144, ISSN 21801843.

 

2018

 

Article

Dr. Rohana Binti Abdullah , Hanizam Bin Hashim , Mohd Nizam Bin Rahman , Profesor Madya Dr Mohd Rizal Bin SallehModelling framework in support of cellular modelling framework in support of cellular manufacturing lean operation,Journal of Advanced Manufacturing Technology, 12, PP235‐246, ISSN 19853157.

 

2018

 

Article

Profesor Madya Ir. Dr. Mohd Hadzley Bin Abu Bakar , Anis Afuza Binti Azhar , Farizan Binti Md Nor , Mohd Hairizal Bin Osman , Nor Fauzi Bin Tamin , I.R. Noorazizi Binti SamsuddinAnalysis of surface integrity and formation of material side flow in dry and wet machining of aluminum alloy,Journal of Advanced Manufacturing Technology, 12, PP501‐512, ISSN 19853157.

 

2018

 

Article

Mohd Hidayat Bin Ab Rahman , Nurul Ain Binti Maidin , Mohd Nazri Bin Ahmad , Mohd Hairizal Bin Osman , Mohammad Khalid Bin Wahid , Azie Noor Marlia Binti RoslanDesign for manufacture and assembly analysis of baby stroller,Journal of Advanced Manufacturing Technology, 12, PP61‐72, ISSN 19853157.

 

2018

 

Article

Nurul Hatiqah Binti Harun , Dr. Mohd Shahir Bin Kasim , Dr. Muhammad Zaimi Bin Zainal Abidin , Profesor Madya Dr Raja Izamshah Bin Raja Abdullah , Hassan Bin AttanA study on surface roughness during fused deposition modelling: A review,Journal of Advanced Manufacturing Technology, 12, PP25‐36, ISSN 19853157.

 

2018

 

Article

Khairul Azri Bin Azlan , Profesor Madya Dr Noreffendy Bin Tamaldin , Profesor Madya Dr Mohd Fadzli Bin AbdollahEffects of biodiesel towards CI engine performance and emission: A brief review,Journal of Advanced Manufacturing Technology, 12, PP441‐452, ISSN 19853157.

 

2018

 

Article

Mohd Soufhwee Bin Abd Rahman , Profesor Madya Dr Wan Hasrulnizzam Bin Wan Mahmood , Dr. Muhammad Ilman Hakimi Chua Bin AbdullahVisual inspection as a screening method in assembly process for quality improvement,Journal of Advanced Manufacturing Technology, 12, PP343‐356, ISSN 19853157.

 

2018

 

Article

Dr. Rose Farahiyan Binti Munawar , Afraha Baiti Binti Arif@Harip , Wan Nur Fateehah Bt Wan Abdullah Shani , Profesor Madya Dr Noraiham Binti Mohamad , Dr. Jeefferie Bin Abd Razak , Hairul Effendy Bin Ab Maulod , Profesor Dr. Qumrul Ahsan , Dr. Mohd Shukor Bin Salleh , Hassan N.H.M.Water‐repellent improvement of green composite sheet surface by hydrophobic modified‐silica coating,Journal of Advanced Manufacturing Technology, 12, PP491‐500, ISSN 19853157.

 

2018

 

Article

Noraina Alia Mat Noor , Dr. Jeefferie Bin Abd Razak , Dr. Syahriza Bt Ismail , Profesor Madya Dr Noraiham Binti Mohamad , Dr. Lau Kok Tee , Dr. Rose Farahiyan Binti Munawar , Junid R.Review on Carbon nanotube based polymer composites and its applications,Journal of Advanced Manufacturing Technology, 12, PP311‐ 326, ISSN 19853157.

 

2018

 

Article

Muhammad Syahid Bin Hasan , Profesor Madya Dr Zuhriah Binti Ebrahim , Profesor Madya Dr Wan Hasrulnizzam Bin Wan Mahmood , Rahman M.N.A.Factors influencing enterprise resource planning system: A review,Journal of Advanced Manufacturing Technology, 12, PP247‐258, ISSN 19853157.

 

2018

 

Article

Dr. Mastura Binti Mohammad Taha , Sapuan S.M. , Dr. Muhd Ridzuan Bin Mansor , Nuraini A.A.Comparative study on weighting customer requirements using fuzzy Analysis Hierarchy Process with extent analysis and analytic hierarchy process,Journal of Advanced Manufacturing Technology, 12, PP477‐490, ISSN 19853157.

 

2018

 

Article

Rahaini Binti Mohd Said , Mohamad Ridzuan Bin Mohamad Kamal , Miswan N.H. , Ng Jack ShengOptimization of moulding composition for quality improvement of sand casting,Journal of Advanced Manufacturing Technology, 12, PP301‐310, ISSN 19853157.

 

2018

 

Article


 

 

TITLE

YEAR

CATEGORY

Nooririnah Bt Omar , Rasi R.Z.R. , Mohd Harris Fadhilah Bin Zainudin , Muhamad Azwar Bin Azhari* , Yusliza Binti Yusuf , Nuzaimah Bte Mustafa , Profesor Madya Dr Umar Al‐Amani Bin Haji Azlan , Muhammad Haidhir Firdaus Bin  Abdul Razi , Dr. Syahriza Bt Ismail , Suhana Muhammad  , *Meletak JawatanExperimental study of welded joints on Steel Plate Cold‐Rolledsheet metal using different electrode tips,Journal of Advanced Manufacturing Technology, 12, PP1‐10, ISSN 19853157.

 

 

2018

 

 

Article

Profesor Madya Dr Noraiham Binti Mohamad , Dr. Anas Bin Abdul Latiff , Dr. Mohd Edeerozey Bin Abd Manaf , Hairul Effendy Bin Ab Maulod , Shueb M.I. , Dr. Rose Farahiyan Binti Munawar

, Profesor Madya Dr Raja Izamshah Bin Raja Abdullah , Dr. Mohd Shahir Bin Kasim , Mazliah Binti Mazlan , Dr. Jeefferie Bin Abd Razak , Profesor Madya Ir. Dr. Mohd Asyadi 'Azam Bin Mohd AbidWear characteristics of recycled carbon fibre‐filled polypropylene composites via acidic surface treatment,World Review of Science, Technology and Sustainable Development, 14, PP165‐179, ISSN 17412242.

 

 

2018

 

 

Article

Nirmal U. , Megat Ahmad M.M.H. , Profesor Madya Ir. Dr. Mohd Yuhazri Bin Yaakob , Kamarul Bin Amir MohamedDegradation behaviour of treated betelnut fibres reinforced polyester composites for tribological applications,World Review of Science, Technology and Sustainable Development, 14, PP180‐227, ISSN 17412242.

 

2018

 

Conference Paper

Mohd Irman Bin Ramli , Nuawi M.O. , Mohammad Rasani M.R. , Abdullah S., Ahmad M.A.F. , Abdullah M.F.Development of polymer mechanical properties characteristics using I‐KAZ 4D analysis method [Pembangunan kaedah pencirian sifat mekanikal bahan polimer menggunakan analisis I‐KAZ 4D],Jurnal Teknologi, 80, PP29‐40, ISSN 1279696.

 

2018

 

Article

Mohammad Firdaus Bin Ani , Ir. Dr. Mohamad Bin Minhat , Profesor Madya Dr Wan Hasrulnizzam Bin Wan Mahmood , Profesor Madya Dr Seri Rahayu Binti Kamat , Fukumi M.Development of driving fatigue strain index to analyze risk levels of driving activity,2017 International Conference on Electrical, Electronics and System Engineering, ICEESE 2017, 43101, PP95‐99, ISSN 9780000000000.

 

2018

 

Conference Paper

Mohd Hafizi Bin Abdul Rahman , Dr. Mohd Shukor Bin Salleh , Mohd Suffian Bin Ab Razak , Mohamad Ridzuan Bin Mohamad Kamal , Zolkarnain Bin Marjom , Anuar

L. , Saad N.A.M.Design and optimization of front lower control arm (FLCA) for C‐segment passenger car,International Journal of Engineering and Technology(UAE), 7, PP71‐75, ISSN 2227524X.

 

2018

 

Article