Programme Name : |
Bachelor of Mechanical Engineering Technology (Maintenances Technology) with Honours |
UPU Code : |
CY53 |
Short Code : |
BMMM |
Duration : |
Full Time : (Minimum 4 years and Maximum 6 years) |
Department : |
Department of Mechanical Engineering Technology (JTKM) |
Entry Requirement : |
Admission |
PROGRAMME EDUCATIONAL OBJECTIVES (PEO)
Program Educational Objectives (PEO) is specific goals describing expected achievements of graduates in their career and professional life after graduation. Below are the PEO for Faculty of Engineering Technology.
PEO1 |
Graduates who are able to practice the knowledge in Mechanical Engineering Technology (Maintenance Technology). |
PEO2 |
Graduates who are able to engage with continuous development and adapt to evolving technologies. |
PEO3 |
Graduates who are able to adapt professional ethics and leadership to meet the needs of the society. |
PROGRAM OUTCOME (PO)
Upon completion of this program, graduate should be able to:
PO1 |
Ability to apply knowledge of mathematics, science, engineering fundamentals and engineering specialisation principles to defined and applied engineering procedures, processes, systems or methodologies in the field of Mechanical Engineering Technology (Maintenance Technology). |
PO2 |
Ability to solve broadly-defined engineering problems systematically to reach substantiated conclusions, using tools and techniques appropriate to Mechanical Engineering Technology (Maintenance Technology). |
PO3 |
Ability to design solutions for broadly-defined engineering technology problems, and to design systems, components or processes to meet specified needs with appropriate consideration for public health and safety, as well as cultural, societal, environmental and sustainability concerns. |
PO4 |
Ability to plan and conduct experimental investigations of broadly-defined problems, using data from relevant sources. |
PO5 |
Ability to select and apply appropriate techniques, resources and modern engineering tools, with an understanding of their limitations. |
PO6 |
Ability to demonstrate an awareness of and consideration for societal, health, safety, legal and cultural issues and their consequent responsibilities relevant to engineering technology practice. |
PO7 |
Ability to demonstrate an understanding of the impact of engineering technology practices, taking into account the need for sustainable development. |
PO8 |
Ability to demonstrate an understanding of professional ethics, responsibilities and norms of engineering technology practices. |
PO9 |
Ability to function effectively as individuals, and as members or leaders in diverse technical teams. |
PO10 |
Ability to communicate effectively on broadly-defined engineering activities with the engineering community and society at large. |
PO11 |
Ability to demonstrate an awareness of project management, business practices and entrepreneurship. |
PO12 |
Ability to recognise the need for professional development and to engage in independent and lifelong learning. |
CURRICULUM STRUCTURE
CODE |
SUBJECT |
CATEGORY |
CREDIT |
PRE- REQUISITE |
BMMU 1013 |
Matematik Teknikal Technical Mathematics |
P |
3 |
|
BMMM 1062 |
Fizik Physics |
P |
2 |
|
BMMA 1303 |
Grafik Kejuruteraan Engineering Graphics |
K |
3 |
|
BMMP 1313 |
Bahan Kejuruteraan Engineering Materials |
K |
3 |
|
BMMP 1303 |
Amalan Pembuatan Manufacturing Practices |
K |
3 |
|
BMMP 2503 |
Pengukuran dan Instrumentasi Measurement and Instrumentation |
K |
3 |
|
BLHW 1702 |
Tamadun Islam dan Tamadun Asia Islamic and Asian Civilizations |
W |
2 |
|
BKKX XXX1 |
Kokurikulum I Cocurriculum I |
W |
1 |
|
BMMU 1023 |
Kalkulus Untuk Teknologi Calculus For Technology |
P |
3 |
|
BMMA 1323 |
Reka Bentuk Kejuruteraan Engineering Design |
K |
3 |
|
BMMA 1333 |
Statik Statics |
K |
3 |
|
BMMA 1313 |
Prinsip Elektrik dan Elektronik Principles of Electrical and Electronic |
K |
3 |
|
BMMH 2303 |
Termodinamik Thermodynamics |
K |
3 |
|
BLHW 1442 |
Bahasa Inggeris untuk Akademik English for Academic Purposes |
W |
2 |
|
BKKX XXX1 |
Kokurikulum II Cocurriculum II |
W |
1 |
|
BMMU 2043 |
Kaedah Statistik Statistical Methods |
P |
3 |
|
BMMM 2333 |
Teknologi Pneumatik & Hidraulik Pneumatic & Hydraulic Technology |
K |
3 |
|
**BMMM 2313 |
Dinamik & Mekanik Mesin Dynamics & Mechanics of Machine |
K |
3 |
BMMA 1333 |
BMMM 2323 |
Teknologi Perkakasan Mesin Machine Tool Technology |
K |
3 |
|
BMMP 1323 |
Proses Pembuatan Manufacturing Processes |
K |
3 |
|
BMMH 2313 |
Mekanik Bendalir Fluid Mechanics |
K |
3 |
|
BLHL XXX2 |
Bahasa Ketiga Third Language |
W |
2 |
|
BMMU 2033 |
Kalkulus Lanjutan Untuk Teknologi Advanced Calculus For Technology |
P |
3 |
|
BMMH 3323 |
Kawalan & Instrumentasi Control & Instrumentation |
K |
3 |
|
**BMMM 2303 |
Mekanik Pepejal Solid Mechanics |
K |
3 |
BMMA 1333 |
BMMM 2343 |
Asas Tribologi Basic Tribology |
K |
3 |
|
BMMM 2502 |
Pengenalan Kepada Penyelenggaraan Introduction To Maintenance |
K |
2 |
|
BLHW 2452 |
Penulisan Akademik Academic Writing |
W |
2 |
|
BLHW 2712 |
Hubungan Etnik Ethnic Relations |
W |
2 |
|
BMMM 3513 |
Motor Industri Industrial Motor |
K |
3 |
|
BMMM 3523 |
Teknologi Penyelenggaraan & Pengurusan Aset Maintenance Technology & Asset Management |
K |
3 |
|
BMMM 3533 |
Teknologi Penghantaran Transmission Technology |
K |
3 |
|
BMMM 3543 |
Diagnostik dan Pengenalpastian Masalah Penyelenggaraan Maintenance Diagnostic and Troubleshooting |
K |
3 |
|
BMMM 3553 |
Penyelenggaraan Mesin Mekanikal Mechanical Machine Maintenance |
K |
3 |
|
BLHW 3462 |
Bahasa Inggeris untuk Interaksi Profesional English for Professional Interaction |
W |
2 |
|
***BLHX XXX2 |
Elektif Umum General Elective |
E |
2 |
|
#BMMX 3100 |
Kursus Persediaan Pensijilan Profesional Professional Certificate Preparation Course |
|
|
|
BMMU 3764 |
Projek Sarjana Muda I Bachelor Degree Project I |
K |
4 |
|
BMMM 3583 |
Analisis dan Pemantauan Getaran Vibration Analysis and Monitoring |
K |
3 |
|
BLHC 4032 |
Pemikiran Kritis dan Kreatif Critical and Creative Thinking |
W |
2 |
|
*BMMM XXX3 |
Elektif I Elective I |
E |
3 |
|
*BMMM XXX3 |
Elektif II Elective II |
E |
3 |
|
*BMMX XXX3 |
Elektif III Elective III |
E |
3 |
|
BMMU 4053 |
Etika Kejuruteraan & KKPP Engineering Ethics & OSHE |
P |
3 |
|
BMMM 4602 |
Kesedaran Penyelenggaraan Dalam Reka Bentuk Maintenance Awareness in Design |
K |
2 |
|
BMMM 4623 |
Analisis Minyak dan Serpihan Oil and Wear Debris Analysis |
K |
3 |
|
BMMM 4564 |
Pemeriksaan dan Penyelenggaraan Bangunan Building Inspection and Maintenance |
K |
4 |
|
**BMMU 4774 |
Projek Sarjana Muda II Bachelor Degree Project II |
K |
4 |
BMMU 3764 |
BTMW 4012 |
Keusahawanan Teknologi Technology Entrepreneurship |
W |
2 |
|
BMMU 4786 |
Latihan Industri Industrial Training |
K |
6 |
|
BMMU 4796 |
Laporan Latihan Industri Industrial Training Report |
K |
6 |
|
TOTAL CREDITS |
142 |
|
** Pre-requisite subject
* For Elective I, II and III students may choose any THREE (3) subjects from the list below:
Category :
NO. |
CODE |
SUBJECT |
1. |
BMMH 4593 |
Akustik & Getaran Gunaan HVAC HVAC Applied Acoustic & Vibration |
2. |
BMMH 4613 |
Teknologi Hijau HVAC HVAC Green Technology |
3. |
BMMH 3583 |
Permodelan & Analisis HVAC HVAC Modelling & Analysis |
4. |
BMMM 3593 |
Penentukuran Instrumen Instrument Calibration |
5. |
BMMH 4623 |
Pengurusan Projek Project Management |
*** For General elective, students may choose any ONE (1) subject from the list below:
CODE |
SUBJECT NAME |
BLHW 1722 |
Falsafah Sains Dan Teknologi Philosophy of Science and Technology |
BLHC 4012 |
Komunikasi Organisasi Organizational Communication |
BLHH 1032 |
Psikologi Industri dan Organisasi Industrial Psycology and Organization |
BLHC 4022 |
Kemahiran Perundingan Negotiation Skills |
# For Professional Certificate Preparation Course, student may choose any ONE (1) certificate from the list below:
CODE |
CERTIFICATE NAME |
BMMH 3100 |
Pre Certification For Flammable Refrigerant Personnel |
BMMP 3100 |
Certified SolidWorks Professional (CSWP) |
BMMA 3100 |
Certified Catia V6 – Part Design Associate |
BMMD 3100 |
Certified Hypermesh |
Note: The subject Foundation English Programme, BLHL 1010 is meant for all MUET Band 2 & 3 students ONLY. Students from cohort 2016/2017 will have to obtain MUET Band 4 and above to fulfill the graduation requirement.
- W - University Compulsory Subjects
- P - Program Core Subjects
- K - Course Core Subjects
- E - Elective