Programme Name : |
Bachelor of Mechanical Engineering Technology (Refrigeration and Air-Conditioning Systems) with Honours |
UPU Code : |
UC6521003 |
Short Code : |
BMMH |
Duration : |
Full Time : (Minimum 4 years and Maximum 6 years) |
Department : |
Department of Mechanical Engineering Technology (JTKM) |
PROGRAMME EDUCATIONAL OBJECTIVES (PEO)
Program Educational Objectives (PEO) is specific goals describing expected achievements of graduates in their career and professional life after graduation. Below are the PEO for the Faculty of Engineering Technology Mechanical and Manufacturing.
PEO1 |
Graduates who are able to practice the knowledge in Mechanical Engineering Technology (Refrigeration and Air-Conditioning Systems) |
PEO2 |
Graduates who are able to engage with continuous development and adapt to evolving technologies. |
PEO3 |
Graduates who are able to adapt professional ethics and leadership to meet the needs of the society. |
PROGRAM OUTCOME (PO)
Upon completion of this program, the graduate should be able to:
PO1 |
Ability to apply knowledge of mathematics, science, engineering fundamentals and engineering specialisation principles to defined and applied engineering procedures, processes, systems or methodologies in the field of Mechanical Engineering Technology (Refrigeration and Air-Conditioning Systems). |
PO2 |
Ability to solve broadly-defined engineering problems systematically to reach substantiated conclusions, using tools and techniques appropriate to Mechanical Engineering Technology (Refrigeration and Air-Conditioning Systems). |
PO3 |
Ability to design solutions for broadly-defined engineering technology problems, and to design systems, components or processes to meet specified needs with appropriate consideration for public health and safety, as well as cultural, societal, environmental and sustainability concerns. |
PO4 |
Ability to plan and conduct experimental investigations of broadly-defined problems, using data from relevant sources. |
PO5 |
Ability to select and apply appropriate techniques, resources and modern engineering tools, with an understanding of their limitations. |
PO6 |
Ability to demonstrate an awareness of and consideration for societal, health, safety, legal and cultural issues and their consequent responsibilities relevant to engineering technology practice. |
PO7 |
Ability to demonstrate an understanding of the impact of engineering technology practices, taking into account the need for sustainable development. |
PO8 |
Ability to demonstrate an understanding of professional ethics, responsibilities and norms of engineering technology practices. |
PO9 |
Ability to function effectively as individuals, and as members or leaders in diverse technical teams. |
PO10 |
Ability to communicate effectively on broadly-defined engineering activities with the engineering community and society at large. |
PO11 |
Ability to demonstrate an awareness of project management, business practices and entrepreneurship. |
PO12 |
Ability to recognise the need for professional development and to engage in independent and lifelong learning. |
CURRICULUM STRUCTURE
|
CODE |
COURSE |
CATEGORY |
CREDIT |
PRE- |
REQUISITE |
|||||
SEMESTER 1 |
BMMU 1013 |
Matematik Teknikal |
P |
3 |
|
Technical Mathematics |
|||||
BMMM 1062 |
Fizik |
P |
2 |
|
|
Physics |
|||||
BMMA 1303 |
Grafik Kejuruteraan |
K |
3 |
|
|
Engineering Graphics |
|||||
BMMP 1313 |
Bahan Kejuruteraan |
K |
3 |
|
|
Engineering Materials |
|||||
BMMP 2503 |
Pengukuran dan Instrumentasi |
K |
3 |
|
|
Measurement and Instrumentation |
|||||
BMMA 1333 |
Statik |
K |
3 |
|
|
Statics |
|||||
BLHW 1762 |
Falsafah dan Isu Semasa |
W |
2 |
|
|
Philosophy and Current Issues |
|||||
BKKX XXX1 |
Kokurikulum I |
W |
1 |
|
|
Cocurriculum I |
|||||
TOTAL CREDITS THIS SEMESTER |
20 |
|
|||
SEMESTER 2 |
BMMU 1023 |
Kalkulus untuk Teknologi |
P |
3 |
|
Calculus for Technology |
|||||
BMMP 1303 |
Amalan Pembuatan |
K |
3 |
|
|
Manufacturing Practices |
|||||
BMMH 1XX3 |
Asas Elektrik dan Elektronik HVAC |
K |
3 |
|
|
Fundamental of HVAC Electric and Electronic |
|||||
BMMA 1323 |
Reka Bentuk Kejuruteraan |
K |
3 |
|
|
Engineering Design |
|||||
BMMH 2303 |
Termodinamik |
K |
3 |
|
|
Thermodynamics |
|||||
BLLW 1142 |
Bahasa Inggeris untuk Akademik |
W |
2 |
|
|
English for Academic Purposes |
|||||
BKKX XXX1 |
Kokurikulum II |
W |
1 |
|
|
Cocurriculum II |
|||||
TOTAL CREDITS THIS SEMESTER |
18 |
|
|||
|
|||||
|
CODE |
COURSE |
CATEGORY |
CREDIT |
PRE- |
REQUISITE |
|||||
SEMESTER 3 |
BMMU 2043 |
Kaedah Statistik |
P |
3 |
|
Statistical Methods |
|||||
BEEA 1343 |
Pengaturcaraan Komputer |
K |
3 |
|
|
Computer Programming |
|||||
**BMMM 2303 |
Mekanik Pepejal |
K |
3 |
BMMA 1333 |
|
Solid Mechanics |
|||||
**BMMM 2313 |
Dinamik dan Mekanik Mesin |
K |
3 |
BMMA 1333 |
|
Dynamic and Mechanics of Machine |
|||||
**BMMA 2353 |
Permodelan dan Analisis Berkomputer |
K |
3 |
BMMA 1303 |
|
Modelling and Computer Analysis |
|||||
BLHW 2772 |
Penghayatan Etika Dan Peradaban |
W |
2 |
|
|
Appreciation of Ethics and Civilizations |
|||||
BTMW 4012 |
Keusahawanan Teknologi Technology Enterpreneurship |
W |
2 |
|
|
TOTAL CREDITS THIS SEMESTER |
19 |
|
|||
SEMESTER 4 |
BMMU 2033 |
Kalkulus Lanjutan untuk Teknologi |
P |
3 |
|
Advanced Calculus for Technology |
|||||
BMMH 2XX3 |
Projek Rekabentuk HVAC |
K |
3 |
|
|
HVAC Design Project |
|||||
BMMH 2313 |
Mekanik Bendalir |
K |
3 |
|
|
Fluid Mechanics |
|||||
BMMH 3553 |
Pemindahan Haba |
K |
3 |
|
|
Heat Transfer |
|||||
BMMH 2503 |
Asas HVAC dan Penyejukan |
K |
3 |
|
|
Fundamental of HVAC and Refrigeration |
|||||
BLHL XXX2 |
Bahasa Ketiga |
W |
2 |
|
|
Third Language |
|||||
**BLLW 2152 |
Penulisan Akademik |
W |
2 |
BLLW 1142 |
|
Academic Writing |
|||||
TOTAL CREDITS THIS SEMESTER |
19 |
|
|||
|
|||||
|
CODE |
COURSE |
CATEGORY |
CREDIT |
PRE- |
REQUISITE |
|||||
SEMESTER 5 |
BMMH 3323 |
Kawalan dan Instrumentasi |
K |
3 |
|
Control and Instrumentation |
|||||
BMMH 3573 |
Rekabentuk Sistem Penyejukan |
K |
3 |
|
|
Refrigeration System Design |
|||||
BMMH 3533 |
Beban Pemanasan dan Penyejukan |
K |
3 |
|
|
Heating and Cooling Load |
|||||
BMMH 4593 |
Akustik dan Getaran Gunaan HVAC |
K |
3 |
|
|
HVAC Applied Acoustics & Vibration |
|||||
|
Bahasa Inggeris untuk Interaksi Profesional |
|
|
|
|
**BLLW 3162 |
English for Professional Interaction |
W |
2 |
BLHW 2452 |
|
***BLHX XXX2 |
Elektif Umum |
E |
2 |
|
|
General Elective |
|||||
TOTAL CREDITS THIS SEMESTER |
16 |
|
|||
SEMESTER 6 |
BMMH 3XX3 |
Kualiti Udara Dalaman |
K |
3 |
|
Indoor Air Quality |
|||||
BMMH 3563 |
Sistem Pengagihan Udara |
K |
3 |
|
|
Air Distribution System |
|||||
|
Penyaman Udara dan Penyejukan Kenderaan |
|
|
|
|
BMMH 3574 |
Transportation Air Conditioning and |
K |
4 |
||
|
Refrigeration |
|
|
||
**BMMH 4603 |
Sistem Elektrik dan Kawalan HVAC |
K |
3 |
BMMH 1213 |
|
HVAC Electrical and Control System |
|||||
**BMMU 3764 |
Projek Sarjana Muda I |
K |
4 |
|
|
Bachelor Degree Project I |
|||||
BLHC 4032 |
Pemikiran Kritis dan Kreatif |
W |
2 |
|
|
Critical and Creative Thinking |
|||||
#BMXX XXX0 |
Kursus Persediaan Pensijilan Profesional |
|
|
|
|
Professional Certificate Preparation Course |
|||||
TOTAL CREDITS THIS SEMESTER |
19 |
|
|||
|
|||||
|
CODE |
COURSE |
CATEGORY |
CREDIT |
PRE- |
REQUISITE |
|||||
SEMESTER 7 |
BMMU 4053 |
Etika Kejuruteraan dan KKKP |
P |
3 |
|
Engineering Ethics and OSHE |
|||||
**BMMU 4774 |
Projek Sarjana Muda II |
K |
4 |
BMMU 3764 |
|
Bachelor Degree Project II |
|||||
|
Klasifikasi Sistem Penyaman Udara Classification of Air Conditioning System |
|
|
|
|
BMMH 3523 |
K |
3 |
|||
*BMMH XXX3 |
Elektif I |
E |
3 |
|
|
Elective I |
|||||
*BMMH XXX3 |
Elektif II |
E |
3 |
|
|
Elective II |
|||||
*BMMX XXX3 |
Elektif III |
E |
3 |
|
|
Elective III |
|||||
TOTAL CREDITS THIS SEMESTER |
19 |
|
|||
SEMESTER 8 |
BMMU 4786 |
Latihan Industri |
K |
6 |
|
Industrial Training |
|||||
|
|
|
|
|
|
|
Laporan Latihan Industri |
|
|
||
BMMU 4796 |
Industrial Training Report |
K |
6 |
||
TOTAL CREDITS THIS SEMESTER |
12 |
|
|||
TOTAL CREDITS |
142 |
|
** Pre-requisite COURSE
W University Compulsory
P Programme Core
K Course Core
E Elective
* For Elective I, II and III students may choose any THREE (3) COURSES from the list below:
NO. |
CODE |
COURSE |
1. |
BMMH 3543 |
Penyelenggaraan Sistem HVAC Maintenance of HVAC System |
2. |
BMMH 4613 |
Teknologi Hijau HVAC HVAC Green Technology |
3. |
BMMH 3583 |
Permodelan dan Analisis HVAC HVAC Modelling and Analysis |
4. |
BMMM 3593 |
Penentukuran Instrumen Instrument Calibration |
5. |
BMMH 4623 |
Pengurusan Projek Project Management |
6. |
BMMH 4633 |
Pembuatan Lean Lean Manufacturing |
7. |
BMMH 4643 |
Jig dan Lengkapan Jig and Fixtures |
8. |
BMMH 4653 |
Amalan Hadapan Perindustrian Industrial Forward Practice |
9. |
BMMH 4663 |
Pengurusan Kewangan, Kos dan Ekonomi Engineering Financial, Costing and Economics |
10. |
BMMH 4673 |
Pengurusan Pembuatan Manufacturing Management |
*** For General elective, students may choose any ONE (1) COURSE from the list below:
CODE |
COURSE NAME |
BLHW 1722 |
Falsafah Sains dan Teknologi Philosophy of Science and Technology |
BLHC 4012 |
Komunikasi Organisasi Organizational Communication |
BLHH 1032 |
Psikologi Industri dan Organisasi Industrial Psychology and Organization |
BLHC 4022 |
Kemahiran Perundingan Negotiation Skills |
# For Professional Certificate Preparation Course, students may choose any ONE (1) certificate from the list below:
CODE |
CERTIFICATE NAME |
BMMH 3100 |
Flammable Refrigerant Certified Personnel Certification Preparation |
BMMD 3100 |
Solidworks Associate Certification |
BMMA 3100 |
Catia V6 – Part Design Associate Certification |
BMMA 3110 |
Hypermesh Certification |
BMCG 2520 |
Autocad Professional Certification Preparation |